32M ASD Tugboat for Sale – New Built 2 Units
32M ASD Tugboat for Sale – New Built 2 Units
GENERAL PARTICULARS:
Length overall = 32.00 metres
Beam, moulded, extreme = 12.80 metres
Depth, moulded (hull) = 5.37 metres
Navigation draft = 5.80 metres, approximate
Bollard pull = 80 tonnes
bollard pull, astern = 76 tonnes (approximate)
free running speed, ahead = 12.5 knots
cruising speed = 12 knots
| (B) Deck Machinery and Fitting |
| Anchor : 2 x 495KG AC14 HHP |
| Dia. 22mm K3 x 302.5m total length Stud Link Chain c/w kentre shackles |
| Electric Capstan 5t @ 15m/min on aft Deck |
| Bow Towing winch / Anchor windlass. Drum cap : 2 x dia.60 x 250m Steelite Superline rope |
| Aft Towing Winch. Drum cap : dia.52 x 800m long SWR. 65.4T @ 1ST LAYER 9.2m/min |
| Tow Pin with stern roller (triple pin set with wire roller and hold down block @ 80 ton SWL) c/w power pack |
| Knuckle telescopic Deck Crane 2 Ton @ 8 meter radius C/W Power pack |
| 1st speed 105t @ 10m/min. Max speed 40t @ 42m/min. Cable lifter :9.4t @ 21m/min |
| Towing steelite superline Rope Dia. 60mm x 250m long |
| Towing SWR Dia. 52mm x 800m long. 6 x 36 IWRC EEIPS RHRL GALV. SWR. |
| 4 x 120m PP Rope BS 70KN |
| (C) Propulsion Machinery |
| Main Engine Caterpillar 3516C Capacity : 2 x 2525Kw
@ 1800rpm (Air start) |
| Box Cooler for M/E = 2 units |
| M/E special exhaust Silencer |
| PTO Clutch for Fi-Fi Pump1 input / 1 output |
| PTO Gear Box to drive 400kW Shaft Alternator and Hyd. Pump couple to one Main Engine |
| Azimuth Thruster Rolls Royce US255CP Cap : 2 x 2525Kw @ 1800rpm or CAT Propulsion |
| Box Cooler for Propulsion = 2 units |
| 200kW Tunnel Bow Thruster, Electric Motor driven vertical mount c/w Soft starter Panel |
| Hyd SW Cooling Pump |